Driveways · Paths · Slabs
Concrete driveways in Perth
New concrete driveways, paths and slabs, set out for good drainage and finished with attention to the details that last.
Why a new concrete driveway?
Concrete is a strong, low-maintenance and cost-effective surface for driveways, carports, paths and slabs. When an existing driveway has sunk, heaved or broken up, or you're building new, a properly formed and poured slab gives you a sound base that can be left as is, sealed, or later finished with a premium surface such as resin bound aggregate.
What we pay attention to
- Base preparation — a compacted, stable sub-base suited to the ground conditions; on Perth's sandy soils, good compaction matters.
- Set-out, levels and falls — planned so water drains away from your home and toward suitable outlets.
- Reinforcement — mesh or reinforcement as appropriate for the use, such as vehicle traffic.
- Control joints — placed to help manage shrinkage cracking and keep lines looking neat.
- Finish options — such as broom, smooth trowelled or other finishes; we'll explain what suits your site and budget.
Typical uses
New driveways and crossovers, carports, garage aprons, side paths, front paths, shed and garden slabs, and patio bases. Crossovers (the section between your boundary and the road) often need approval from your local council, which sets its own specifications. We'll flag this during quoting so you can check requirements with your council.
Our concrete process
- Inspect and quote. We measure up, discuss the finish and levels, and give you a written quote with the scope set out.
- Remove and excavate. Old concrete, pavers or soil are removed where needed, and the area is excavated to the right depth.
- Base and formwork. The sub-base is placed and compacted, then formwork is set to the planned levels and falls.
- Reinforce and pour. Reinforcement is placed and the concrete is poured, screeded and finished.
- Joints and curing. Control joints are cut or tooled, and the slab is left to cure properly.
- Handover. Formwork is removed, the site is cleaned up, and we let you know when the driveway can take vehicles.
Already have a driveway that's just tired?
If your concrete is still sound but looks worn or stained, concrete resurfacing may be a cheaper and quicker option than replacing it. Ask us and we'll give you an honest view of both.
Related services
Frequently asked questions
How long before I can drive on a new concrete driveway?
Concrete gains strength over time. Light foot traffic is usually possible after a day or so, but cars should wait longer, commonly around a week, depending on the mix and the weather. We confirm timing at handover.
Will my new concrete crack?
Concrete naturally shrinks as it cures, so some fine cracking is normal. Good base preparation, reinforcement and well-placed control joints help ensure cracks occur along the joints rather than across the slab.
Do I need council approval for a driveway crossover?
Many Perth councils require an application or approval for crossovers and have their own specifications. Check with your local council; we can help with the details they need.
Can you remove my old driveway?
Yes. Removal and disposal of old concrete or pavers can be included in the quote.
Should I seal a new concrete driveway?
Sealing can help resist stains and make cleaning easier. We will discuss whether it suits your finish and when it can be applied.
Ready for a free, written quote?
Tell us your suburb, the approximate area and send a few photos. We cover all of Perth.
Request a free quote info@gradeasurfaces.com.au